APC (Schneider)

APC BK500-CH

¥314.00

Output Power Capacity	300 Wattage/500 VA
max with Power	300 Wattage/500 VA
rated Output Voltage	230V
full Load Effect Rate	95.0 percent
Output Rate ( and Main Rate Sync)	47 - 53Hz(50Hz nominal)
crest factor	3:1
Topology	Standby
waveform Class	sine wave step-by-step approximation
Output connection	(2) Chinese outlet ( Standby Battery)

APC BK500-CH Input


control Panel	LED status display "online", "Battery on"
with Alarma	Utility Power Alarm in case of blackout: Especially low Battery Alarm overload continuous tone alarm

Battery No.	VRLA
charging time	24 h
replacing the Battery Pack	RBC2
RBC™ Quantity	1
curve fitting measured run time data. All with measurements were carried out using a fully charged new Battery, under typical ambient conditions and without with Power Input and Resistor Load Output.

surge suppression energy

180 Joule

working environment	0 - 40°C
working relative humidity	10 - 90%
Operation Height	0-999.9 m
storage temperature	-15 - 45°C
storage Relative Humidity	5 - 95%
storage Height	0-4500 m
audible noise 1 m from the surface of the Standby	40.00 dBA


standard Warranty	repair or replacement within 2 years
compliance with environmental requirements	RoHS 7b Exemption, China RoHS,REACH: no Pack incl. SVHC