
SANTAK
SANTAK MT1000S
SANTAK MT1000S external battery long-acting type
- Capacity
- 1KVA
- In / Out
- Single phase input single phase output
¥592.00View details

SANTAK
SANTAK MT500
Output Power Capacity | 300W/500 VA |
rated Output Voltage | 220VAC |
Output Rate | and Utility Power Sync 50Hz +/- 0.5% Hz |
UPS Conversion Time | 0-10ms |
Output waveform | square wave |
overload capacity | 47 sec Load >110%, 25 sec Load >150%,300 ms Load >200% |
Output x quantity | GB 3+1 |
rated Input voltage | 148~295 VAC (Super Mode )173 ~ 273VA (Standard Mode) |
Input Rate | (45-55)Hz ±1Hz |
UPS Power Rate | 85.0 percent |
Input line length | 1.83 m |
interface Port | select with :USB card, Wedpower card, AS400 card, EMD environmental monitoring Unit |
control Panel | LED |
with Alarma | Alarm once in 4 seconds when Utility Power is out: Alarm once in special low Battery |
Battery No. | Maintenance-free Sealed Lead-acid Battery |
charging time | 10 h |
External Battery Specifications | DC12V |
Backup Time | 10 min ( Half load) |
high | 79.00mm |
wide | 198.00mm |
deep | 317.00mm |
net weight | 5.0KG |
working environment | 0 - 40°C |
working relative humidity | 0 - 95% |
Operation Height | 0-3000 m |
storage temperature | -5 - 45°C |
storage Relative Humidity | 0 - 95% |
storage Height | 0-15000 m |
audible noise 1 m from the surface of the Standby | 40.00 dBA |
| standard Warranty | maintenance within 3 years |
| compliance with environmental requirements | roHS,REACH: no Pack incl. SVHC |
Leave your details and an engineer will get back to you within one business day.
UPS Power Supply

SANTAK
SANTAK MT1000S external battery long-acting type

SANTAK
SANTAK MT1000

APC (Schneider)
SMC2000I2U-CH

APC (Schneider)
SMT3000RMI2U-CH

APC (Schneider)
SMT2200RMI2U-CH

APC (Schneider)
SMC1500I2U-CH

APC (Schneider)
SMC3000RMI2U-CH

Vertiv (Emerson)
ITG 3KVA Standard model - GR03KS